PBX Telephony System Specifications

IP PBX 8000 Product Description

IPPBX8000 is a converged communications server for medium and large enterprises, providing an integrated voice, data, and security solution. solution. The product integrates a hybrid analog/digital/IP PBX, router, L3 switch, firewall, VPN, local web-based management interface, and SNMP/TR069-based remote access. The product integrates a hybrid analog/digital/IP PBX, router, L3 switch, firewall, VPN, local web-based management interface, and SNMP/TR069-based remote management interface. The IP PBX8000 product uses softswitch core technology to support local access to analog and IP phone users, and remote access to analog users under IP phones or IADs using the IP carrier network. It supports local access to analog and IP telephony subscribers and remote access to analog subscribers under IP telephony or IAD using IP carrier networks, enabling mixed networking of analog and IP telephony. It can also connect to PSTN or private network voice-switching equipment through analog/digital trunking and broadband SIP trunking, effectively improving the efficiency of enterprise deployment and communication. The network can be connected to PSTN or private network voice switching equipment through analog/digital trunking and broadband SIP trunking to effectively improve enterprise deployment and communication efficiency and enhance enterprise value

IP PBX8000 Hardware Specifications

IP PBX 8000 Structure

• Appearance:

1. IP PBX8000 4.3u height, with vertical switchboard structure, support hot switch, single switch capacity 384FXS or 384FXO, Max 16E1

• Major single board description

1 . SSW system exchange board

(1) .Outlook

Wan 1pcs, LAN 2pcs, Console 1pcs, USB 1pcs,

(3) . Console

Connection Type: RJ45

Port Standard: RS232

Baud Rate :9600bps~115200bps；default 115200bps

Support Service: Connect to the character terminal, Connect to the local PC serial port, and run the terminal emulator command interface on the PC

(4). Ethernet Interface

The IPPBX provides 3*10M / 100M / 1000M GE Ethernet electrical interfaces (1 WAN port and 2 LAN ports, Gigabit Ethernet ports).

Connection Type: RJ45

Interface Type: MD/MDIX adaptive

Support Frame Format: Ethernet_II / Ethernet_SNAP

Word mode: 10M/100M/1000M adaptive

• Media resource board

(1). Outward

(2). Interface: 6 Port HW

(3). HW interface: Connect type RJ45,10pin

(4). DSP indicators: The IP PBX 8000 MRU media resource board supports up to 4 DSPS, DSP1~DSP4, corresponding to 4 DSP initialization states respectively. If the initialization is successful, the corresponding indicator light will always be on; if the initialization fails or the corresponding indicator light is not installed, it will be off.

• MEXP Host extension management board

（1）Outward

（2）Specification

ETH: 2port

Console: 1 port

USB: 1port

( 3）Console

Connection Type: RJ45

Port Standard: RS232

Baud Rate : 9600bps~115200bps；default 115200bps

Support Service: Connect to the character terminal, Connect to the local PC serial port, and run the

terminal emulator command interface on the PC.

（4）Ethernet interface

IPPBX 8000 MEXP host extension management board provides two Ethernet ports which is for

version update and maintenance and management.

• E1/T1 digital relay board

(1) Outlook

(2) E1/T1 interface

E1: 4-8 Port

Interface type: RJ45,120 Ω

• FXO analog trunk board

(1) Outlook

(2) Spec

• FXS analog trunk board

(1) Outlook

(2)Spec